Home
About Us
Company Profile
Culture
Honor
Company Environment
Contact Us
Products
TA1
TC4
TC11
TA15
Equipment
Testing Equipment
Production Equipment
Application
News Center
Online message
English
NEWS CENTER
29
2021-06
Four Typical Structures and Development Direction of Additive Manufacturing in Aerospace Field
In the article "China Southern Airlines: Systematic Discussion on Three Typical Materials and Application Challenges of Aerospace Additive Manufacturing", we have introduced Professor Gu Dongdong's summary of high-performance metal materials in the aerospace field. Light-weight high-strength alloys represented by aluminum and titanium, and load-bearing heat-resistant alloys represented by Ni-based high-temperature alloys are important application materials in laser additive manufacturing; lightweight, large, integral and complex structures are the main development directions of additive manufacturing, which contains many complex and advanced scientific problems. In this issue, we continue to follow the footsteps of Professor Gu Dongdong for in-depth study.
2021-06-29
Effect of Metal 3D Printing Process Chain on Properties of TC4 Powder
In the powder bed laser melting technology, the material from production, transportation, storage to printing and recycling process, the powder in the entire process chain has been under a variety of mechanical and atmospheric environment, the chemical composition and shape of the powder particles, as well as the characteristics of the entire powder material, may be affected by the atmosphere, temperature, humidity and external forces and other factors. This paper discusses the potentially important influencing factors of TC4 powder in the entire process flow, and the results can be used for other powder processing and management to ensure the quality of the material throughout the service life, making the SLM process more robust and reliable. Powder production factors In order to evaluate the characteristics and batch stability of the powders, the same specifications and two batches of powders produced by three different processes (gas atomization EIGA, plasma atomization PA, and inductively coupled plasma atomization ICPA) of TC4 (grade 5) were studied. The particle size distribution, particle morphology and fluidity of these powders were determined respectively. The results show that the size of the particles of the three powders is between 15-65 microns, with a Gaussian distribution, but the PA and ICPA powders show a broader particle size distribution compared to the EIGA powder. The flow time measured by the Hall flowmeter is in the range of 14.6 s-16.1s, indicating that all powders and batches have good flowability. Electron microscopy results showed that all three powders were highly spherical, although the EIGA powder particles were slightly elongated, while the ICPA powder contained a lot of satellite powder.
30
Metal forming new process must know: MIM
2021-06-30
Annual consumption of 5.4 tons of titanium alloy, successfully used in land, sea, air, space metal 3D printing solutions
On February 8, 2021, Sciaky, the world's leading supplier of metal additive manufacturing, announced that the total amount of titanium alloy deposited by electron beam additive manufacturing technology in 2020 reached 5443kg, which exceeded the previous data. Even during the epidemic, high-end manufacturing in the United States does not appear to have been seriously affected, and both car manufacturing and rocket testing and launches are taking place as usual.
SLM technology of deep dissection metal 3d printing technology (selected laser melting)
The metal powder we usually see is like this. After experiencing irresistible reasons, it changed into the following figure. It is said that the culprit is the laser, metal powder after all what process? Today, I took you along the SLM(Selective Laser Melting) selective melting technology to deeply dissect.
Application of Titanium Alloy in Laser/Electron Beam Additive Manufacturing
The rapid development of additive manufacturing technology provides a new method for the production of titanium alloy, and the laser/electron beam additive manufacturing method has been widely studied by domestic scholars in the production of titanium alloy. Titanium and titanium alloys have broad application prospects in various industrial fields, including shipbuilding, aerospace, automobile manufacturing, etc., due to their excellent physical and chemical properties such as low density, high temperature resistance, and corrosion resistance. At the same time, it is also one of the important materials in the national defense industry. The application of titanium alloy has played a huge role in promoting industrial development, and its product quality has been greatly improved because of its superior performance to traditional materials, which meets the requirements of industrial development for new materials and new processes, and accelerates the development of modern industry. With the continuous improvement of titanium productivity, titanium alloy has become the third metal in industrial production.