29

2021-06

Effect of Metal 3D Printing Process Chain on Properties of TC4 Powder

In the powder bed laser melting technology, the material from production, transportation, storage to printing and recycling process, the powder in the entire process chain has been under a variety of mechanical and atmospheric environment, the chemical composition and shape of the powder particles, as well as the characteristics of the entire powder material, may be affected by the atmosphere, temperature, humidity and external forces and other factors. This paper discusses the potentially important influencing factors of TC4 powder in the entire process flow, and the results can be used for other powder processing and management to ensure the quality of the material throughout the service life, making the SLM process more robust and reliable. Powder production factors In order to evaluate the characteristics and batch stability of the powders, the same specifications and two batches of powders produced by three different processes (gas atomization EIGA, plasma atomization PA, and inductively coupled plasma atomization ICPA) of TC4 (grade 5) were studied. The particle size distribution, particle morphology and fluidity of these powders were determined respectively. The results show that the size of the particles of the three powders is between 15-65 microns, with a Gaussian distribution, but the PA and ICPA powders show a broader particle size distribution compared to the EIGA powder. The flow time measured by the Hall flowmeter is in the range of 14.6 s-16.1s, indicating that all powders and batches have good flowability. Electron microscopy results showed that all three powders were highly spherical, although the EIGA powder particles were slightly elongated, while the ICPA powder contained a lot of satellite powder.

2021-06-29

< 12 >